Repairing a physically broken micro SD memory card is not a straightforward task and often not recommended. However, if you are referring to a malfunctioning or corrupted micro SD card that is not physically damaged, there are some steps you can try to recover the data or potentially fix the issue. Keep in mind that these methods might not work in all cases, and there is always a risk of data loss. If your micro SD card is physically damaged or cracked, it’s unlikely to be repairable, and you should consider replacing it.
If you want to buy a good quality Sd card
Here are some steps you can attempt to repair a malfunctioning micro SD card:
- Check the Lock Switch
- Try a Different Card Reader/Device:
- Use Disk Utility
- Data Recovery Software:
- Format the Micro SD Card:
- Use Command Prompt/ Terminal:
If none of these steps work and your micro SD card is still not functioning correctly, it’s likely that the card has experienced physical damage or has a severe internal issue. In such cases, it’s best to replace the micro SD card with a new one.
If the data on the micro SD card is valuable, consider seeking professional data recovery services, which often have specialized tools and expertise to handle complex data recovery cases.
Check the Lock Switch:
The lock switch on an SD card (including micro SD cards) is a small physical slider located on the side of the card. Its primary purpose is to prevent accidental deletion or overwriting of data on the card.
Try a Different Card Reader/Device:
Sometimes, the issue might not be with the micro SD card itself but with the card reader or the device you are using. Try inserting the card into a different card reader or device to see if it works.
|If you are trying to repair a physically broken micro SD card, such as one that is cracked, bent, or otherwise damaged, it is unlikely to be repairable by typical DIY methods. In such cases, the best course of action is to stop using the card and consider the following options:
Restart Your Device:
On the other hand, you are referring to a malfunctioning micro SD card (e.g., one that is not being recognized by your device or is showing errors), “Restart Your Device” might be relevant.
Use Disk Utility:
On Windows, you can try using the built-in Disk Management tool to check if the micro SD card is recognized or to format it if necessary. On Mac, you can use Disk Utility for similar purposes.
Data Recovery Software:
If your micro SD card is not accessible or shows errors, you can try using data recovery software like Recurve or Disk Drill to attempt to recover any data on the card.
Here’s a step-by-step guide on how to use data recovery software for a broken micro SD memory card:
Format the Micro SD Card:
Step 1: Insert the Micro SD Card Insert the micro SD card into the card slot of your computer’s card reader or an external card reader connected to your computer.
Step 2: Open File Explorer (Windows) or Finder (Mac) For Windows users, open File Explorer (Windows Explorer) by pressing the Windows key + E or by clicking on the folder icon in the taskbar. For Mac users, open Finder by clicking on the Finder icon in the dock.
Step 3: Locate the Micro SD Card In File Explorer (Windows) or Finder (Mac), you should see the micro SD card listed under “This PC” or “Devices” (Windows) or in the “Devices” section (Mac).
Step 4: Backup Any Important Data If you have any data on the micro SD card that you want to keep, copy it to a safe location on your computer or an external storage device before proceeding with the format.
Step 5: Right-Click on the Micro SD Card In File Explorer (Windows) or Finder (Mac), right-click on the micro SD card’s icon.
Step 6: Select “Format” or “Erase” On Windows, select “Format” from the context menu that appears after right-clicking on the micro SD card. In the format window, you can choose the file system (usually FAT32 or ex FAT for compatibility with most devices) and give the micro SD card a new name if you wish. Then, push on the “Start” button to begin the formatting process.
On Mac, select “Erase” from the context menu. In the erase window, choose the file system (usually MS-DOS (FAT) or ex FAT for cross-platform compatibility) and give the micro SD card a new name if you prefer. Then, push on the “Erase” button to start the formatting process.
Step 7: Confirm the Formatting A warning message may appear, notifying you that all data will be lost. Confirm the action and proceed with the formatting if you are sure you have backed up any necessary data.
Step 8: Wait for the Formatting Process to Complete The formatting process may take a few seconds or depending on the size of the micro SD card.
Step 9: Formatting Complete Once the formatting process is finished, you will see a message indicating the successful completion of the format.
Step 10: Safely Eject the Micro SD Card Before removing the micro SD card from the card reader, make sure to safely eject it from your computer to avoid potential data corruption.